High Power Halogen Electric Heaters: Serious Heat for the Shop Floor
We built these heaters for the real world—the kind of place where the machines never stop, and space is always at a premium. These halogen tubes pack a serious punch: 2500W of power, running on a standard 400V line. And they do it all in a footprint that’s just 300mm long. So you get intense heat, right where you need it, without taking up your whole workstation.
The Power Behind the Heat
Here’s the thing about that 400V, 2500W rating. It means you can run this heater on your standard three-phase power without worrying about tripping breakers or overloading the line. That 300mm length concentrates all that wattage into a tight zone, which gives you two big wins. First, it heats up fast. Second, you get precise control over the temperature. It’s perfect for machines that cycle on and off quickly. But, and this is important, that kind of power density creates a lot of ambient heat. You’ve got to have a solid cooling plan in place.
What’s Inside Counts
The heart of these tubes is the halogen element, sealed inside a quartz envelope. This design keeps the heat output steady over time, sidestepping the burnout that plagues standard coil heaters. Plus, a reflective coating on the tube directs all that infrared energy forward. That means less wasted heat and more of it landing exactly where you want it. And the R7s connector? It’s just a simple, two-pin setup that’s a breeze to wire up, even in cramped spots. It locks in securely, so you never have to worry about it coming loose when the machine starts to vibrate.
Where This Heat Shines
Need intense, focused heat in one spot? This is your go-to. We’re talking about plastic forming, sealing, curing, and pre-heat stations. The compact size makes it a direct drop-in replacement for many existing setups, so you can upgrade without a full machine overhaul. The focused infrared output helps you hit your target temperature faster, which can really speed up your whole process. Just remember, with this kind of power, you need to make sure your machine’s cooling and insulation are up to the task. It’s all about matching the heat to the system.