Keeping Bathrooms Warm (Without Blinding Your Kids)
When we design infrared heaters for bathrooms, we aren’t just thinking about the heat. We’re thinking about the chaos of a wet room—the steam, the splashes, and the fact that people (and babies) are standing right under them. The biggest headache isn’t actually the temperature. It’s the light. If you’ve ever seen a standard short-wave infrared lamp, you know they have this aggressive, blinding glare. It’s harsh. For an adult, it’s annoying. For a baby with developing eyes, it’s way too much. Fixing the glare We didn’t want to choose between “warm” and “comfortable,” so we added special filters to the quartz glass. Here’s how it works: the filters block out that blinding visible light but let the infrared heat slide right through. You still feel that deep, cozy warmth on your skin, but the light stays soft. No more squinting when you step out of the shower. Dealing with the damp Bathrooms are basically steam rooms. Water and electricity don’t mix, and moisture is the fastest way to kill a heating element. That’s why we use an IP55 rating. In plain English? It means the unit can handle dust and water jets hitting it from any angle without breaking a sweat. We use heavy-duty silicone gaskets and sealed cable entries to keep the internals bone-dry. These seals have to be tough. They expand and contract every time the heater turns on and off. If they leak, the heater dies. We make sure they don’t. The trade-off Now, there is a catch. Since we’re filtering out some of the light, we lose a tiny bit of the raw energy you’d get from a basic, unfiltered halogen tube. To make up for that and keep you feeling warm, you’ll need a slightly higher wattage. Just a heads-up: if you’re installing a few of these in one room, double-check your circuit load. Older breakers can be a bit finicky, and running multiple high-wattage units on one line might trip them. It’s worth a quick check with your electrician before you flip the switch.